To study and Measure the Voltage, current Power and Power factor in Series RLC circuit.

Instructions

  • !!! Click on labels to delete connections for the corrusponding node.
  • Make connections as per the instructions given below.
    • 1->23, 2->24
    • 3->25, 4->26
    • 25->5, 6->9, 6->10
    • 11->17, 12->18
    • 13->19, 14->20
    • 15->20, 16->22
    • 8->17, 26->22, 7->26
    • 18->19, 20->21
  • Now, Check the connections by clicking on ‘CHECK’ button.
    • If the connections are ‘Invalid connections’ click on corresponding node to remove the connection.
    • And if the connections are ‘Right Connections’ then follow the below steps.
  • Turn on the MCB.
  • Switch on the variac by clicking on the button.
  • Click on the variac knob to set the voltage at 220V.
  • Now, Click on ‘ADD’ button to add the readings in the observation table.
  • In Calculations section, We have to manually calculate the values by using the formula.

Instructions

ACTION BUTTONS

FORMULAS

\[R = \frac{V_{R}}{I}\] \[X_{L} = \frac{V_{L}}{I} = 2 \pi fL\] \[X_{C} = \frac{V_{C}}{I} = \frac{1}{2 \pi fC}\]
\[Z = \sqrt{R^2 + (X_{L} - X_{C})^2}\] \[\cos\phi = \frac{R}{Z}\]

OBSERVATION TABLE

S.No Voltage Current A(I) A(R) A(C) Power

EXPERIMENT



GRAPH